Copper and brass profiles

Copper and brass profiles


Standard document:
TU U 14-00195452.027-99 - extruded and drawn copper and brass profiles.Specifications


Brand: M1, M1, M2, M2, M3, M3 with the chemical composition of GOST 859-2001 (DSTU GOST 859:2003)


Purpose: The profiles are used to produce copper inductors


Method of production: extruded, drawn

Side A - from 8 mm to 30 mm inclusive *

Side B - 8 mm to 50 mm *

Wall thickness - 1.0 mm to 5.0 mm inclusive *

Length - 1500 - 6000 mm *


Requirements for hire:

1. The geometric dimensions according to TU U 14-00195452.027-99 "Extruded and drawncopper andbrassprofiles"


Note 1. Deviations from the right angle are not regulated.

Note 2. Radius R and r are not tested and are considered optional.


1. The mechanical properties of the material and

Mark

Way
manufacturing

State

Temporary
resistance,
MPa
at least

Elongation A 10,
%, At least

63
Extruded
Drawn
Drawn
-
soft
semisolid
290
290
370
30
40
10
59-1
Extruded
Drawn
Drawn
-
soft
semisolid
360
330
390-410
18
18
8-10
M1, M1,
M2, M2,M3, M3
Extruded
Drawn
Drawn

soft
solid
190
200
240
30
35
3

* External dimensions, wall thickness and length of the profiles agree with the customer when ordering.



Back to section