Hot rolled brass sheets

Hot rolled brass sheets


Standard document:
GOST 2208-2007 - foil, ribbons, sheets and plates brass.
DSTU GOST 2208:2008 - Foil ,leaf plates
BS EN 1652:1998 - Copper and copper alloys. Plate, sheet, strip, tape general purpose.


Material:

63, 68, 90, 59-1, with LK75V Chem. composition according to GOST 15527-2004 (DSTU GOST 15527:2005)

CuZn10, CuZn30, CuZn33, CuZn36, CuZn37 with the chemical composition BS EN 1652:1998


Purpose:
General purpose sheets (used in various industries)


Requirements for hire:

1. Requirements for the geometric dimensions according GOST 2208-2007 (DSTU GOST 2208:2008) and BS EN 1652:1998.


Thickness: from 5.0 mm to 25.0 mm


Width: 600 mm to 1000 mm


Length: 500 mm to 2000 mm


Dimention for thickness, width and length according to GOST 2208-2007 (DSTU GOST 2208:2008), BS EN 1652:1998.


2. The mechanical properties of the material in accordance with GOST 2208-2206 (DSTU GOST 2208:2007) and BS EN 1652:1998.

Normative
document

Alloy

Ultimate strength,
MPa

Elongation δ,%, not less

GOST 2208-2006

(DSTU Standard 2208:2007)

63

290-390

30

68

90

59-1

360-490

18

BS EN 1652:1998

CuZn10, CuZn30, CuZn33, CuZn36, CuZn37

not regulated

The mechanical properties of hot-rolled sheets of alloy grade LK75V are not regulated.

Mechanical properties of hot-rolled sheet with thickness over 12 mm is determined by the customer's request.

The deflection is determined by agreement between manufacturer and consumer.



Back to section