EXTRUDED COPPER RODS

EXTRUDED COPPER RODS


Standart documents:
GOST 1535-2006 - bars brass. Specifications

DSTU Standard 1535: 2007 - Bars brass

BS EN 12163:1998 - Copper and copper alloys.Rods forgeneral purpose.


DIN EN 12165:1998 - Copper and copper alloys.

TU U 27.4-00195452-015-2003 - Tubes, rods, strips and sheets made of special grades of copper.


Specifications

Brand:
M1 M1r, M2, M2r, M3, M3r with the chemical composition GOST 859-2001 (DSTU GOST 859:2003)

Cu-FRTP, Cu-DLP, Cu-DHP with chemical composition BS EN 12163:1998

Cu-DHP with the chemical composition DIN EN 12165:1998

Cu-FRTP, Cu-DLP, Cu-DHP, E-Cu57 TU U 27.4-00195452-015-2003.


Purpose:

- General purpose rods (used in various industries);

- Bars on the DIN EN 12165:1998 used as billets for forging and are designed to forge on sledgehammer or stamping.


The form of the cross section: round


Diameter:

- GOST 1535-2006 (DSTU GOST 1535:2007), TU U 27.4-00,195,452, 015-2003 - 20 mm to 120 mm inclusive *

- By BS EN 12163:1998, DIN EN 12165:1998 - 20 mm to 80 mm incl .*

Length - 1000 mm to 4000 mm *


Requirements for hire:

1. The geometric dimensions *: - GOST 1535-2006 (DSTU GOST 1535:2007), TU U 27.4-00195452-015-2003. - To DIN EN 12165:1998 class A accuracy

2. The mechanical properties and condition of the material:

Tensile strength- at least 190 MPa,alongation - at least 30% on Standard 1535-2006 (DSTU Standard 1535:2007).

By BS EN 12163:1998 and DIN EN 12165:1998 - the state of M (as made).

Other requirements of GOST 1535-2006 (DSTU Standard 1535:2007).

______________

* Requirements for the geometric dimensions of bars agree with the customer when ordering.




Back to section