EXTRUDED BRASS RODS

Standart documents: 

GOST 2060-2006 - bars brass.  Specifications 

DSTU GOST 2060:2007 

DIN EN 12165:1998 - Copper and copper alloys.  Deformable and non-deformable blank for forging 

Alloy: LS 59-1, L63 with the chemical composition of GOST 15527-2004 (DSTU GOST 15527:2005) 

CuZn39Pb2, CuZn39Pb3, CuZn40Pb2, CuZn36Pb2As, CuZn37 with chem. composition of DIN EN 12165:1998 

CuZn43Pb2 with the chemical composition of BS EN 12167:1998 

Purpose: 

 - Rods for general purpose  (used in various industries); 

 - Bars on the DIN EN 12165:1998 used as billets for forging and are designed to forge on sledgehammer or stamping. 

Shape of section: round, square and hex (GOST 2060-2006, DSTU GOST 2060:2007, DIN EN 12165:1998) 

Diameter or distance between parallel faces bar - from 10 mm to 150 mm inclusive 

Length - 1000 mm to 4000 mm 

Requirements for hire: 

 1.  The geometric dimensions according to GOST 2060-2006 (DSTU GOST 2060:2007), DIN EN 12165:1998. 

2.  The mechanical properties and condition of the material in accordance with GOST 2060-2006 (DSTU Standard 2060:2007) 

DIN EN 12165:1998 on the state of M - "as made", ie  not regulated by the requirements for mechanical properties. 

Other requirements of GOST 2060-2006 (DSTU GOST 2060:2007), DIN EN 12165:1998. 

 ______________ 

 * Requirements for the geometric dimensions of bars agree with the customer when ordering.