Hot rolled brass sheets

Hot rolled brass sheets


Standard document: 
GOST 2208-2007 - foil, ribbons, sheets and plates brass.  
DSTU GOST 2208:2008 - Foil ,leaf plates  
BS EN 1652:1998 - Copper and copper alloys.  Plate, sheet, strip, tape general purpose. 


Material: 

Ë63, Ë68, Ë90, ËÑ59-1, with LK75V Chem. composition according to GOST 15527-2004 (DSTU GOST 15527:2005) 

CuZn10, CuZn30, CuZn33, CuZn36, CuZn37 with the chemical composition BS EN 1652:1998 


Purpose:
General purpose sheets (used in various industries) 


Requirements for hire: 

1.  Requirements for the geometric dimensions according  GOST 2208-2007 (DSTU GOST 2208:2008) and BS EN 1652:1998. 


Thickness: from 5.0 mm to 25.0 mm 


Width: 600 mm to 1000 mm 


Length: 500 mm to 2000 mm 


Dimention for thickness, width and length according to GOST 2208-2007 (DSTU GOST 2208:2008), BS EN 1652:1998. 


2.  The mechanical properties of the material in accordance with GOST 2208-2206 (DSTU GOST 2208:2007) and BS EN 1652:1998. 

Normative
document

Alloy 

Ultimate strength, 
MPa 

Elongation δ,%, not less

 GOST 2208-2006 

 (DSTU Standard 2208:2007) 

Ë63

290-390

30

Ë68

Ë90

ËÑ 59-1

360-490

18

BS EN 1652:1998

CuZn10, CuZn30, CuZn33, CuZn36, CuZn37

 not regulated 

The mechanical properties of hot-rolled sheets of alloy grade LK75V are not regulated. 

Mechanical properties of hot-rolled sheet with thickness over 12 mm is determined by the customer's request. 

 The deflection is determined by agreement between manufacturer and consumer. 



Back to section
ðåéòèíã ñàéòîâ
ðåéòèíã ñàéòîâ