EXTRUDED BRASS RODS

EXTRUDED BRASS RODS



Standart documents:

GOST 2060-2006 - bars brass. Specifications

DSTU GOST 2060:2007

DIN EN 12165:1998 - Copper and copper alloys. Deformable and non-deformable blank for forging


Alloy: LS 59-1, L63 with the chemical composition of GOST 15527-2004 (DSTU GOST 15527:2005)

CuZn39Pb2, CuZn39Pb3, CuZn40Pb2, CuZn36Pb2As, CuZn37 with chem. composition of DIN EN 12165:1998

CuZn43Pb2 with the chemical composition of BS EN 12167:1998


Purpose:

-Rodsfor general purpose (used in various industries);

- Bars on the DIN EN 12165:1998 used as billets for forging and are designed to forge on sledgehammer or stamping.


Shape of section: round, square and hex (GOST 2060-2006, DSTU GOST 2060:2007, DIN EN 12165:1998)

Diameter or distance between parallel faces bar - from 10 mm to 150 mm inclusive


Length - 1000 mm to 4000 mm


Requirements for hire:

1. The geometric dimensions according to GOST 2060-2006 (DSTU GOST 2060:2007), DIN EN 12165:1998.


2. The mechanical properties and condition of the material in accordance with GOST 2060-2006 (DSTU Standard 2060:2007)


Alloy

Ultimate strength,
MPa, no less

Elongation A 10%,
at least

59-1

360

18

63

290

30

DIN EN 12165:1998 on the state of M - "as made", ie not regulated by the requirements for mechanical properties.


Other requirements of GOST 2060-2006 (DSTU GOST 2060:2007), DIN EN 12165:1998.

______________

* Requirements for the geometric dimensions of bars agree with the customer when ordering.



Back to section